Outbound Module

Peter Dunkley

Crocodile RCS Ltd

Table of Contents

1. Admin Guide
1. Overview
1.1. Edge Proxy Keep-Alives (STUN)
1.2. Flow Timer
2. Dependencies
2.1. Kamailio Modules
2.2. External Libraries or Applications
3. Parameters
3.1. force_outbound_flag (integer)
3.2. force_no_outbound_flag (integer)

List of Examples

1.1. Edge Proxy Configuration
1.2. Registrar Configuration
1.3. Set force_outbound_flag parameter
1.4. Set force_no_outbound_flag parameter

Chapter 1. Admin Guide

1. Overview

This module provides C-API functions to enable Kamailio to be used as an outbound Edge Proxy (see RFC5626 section 5).

The path and rr modules will bind to this module if it is loaded before they are.

1.1. Edge Proxy Keep-Alives (STUN)

Outbound Edge Proxies MUST support STUN NAT keep-alives on their SIP UDP ports. Kamailio supports this though the stun module.

1.2. Flow Timer

The maximum interval at which a User Agent must send a keep-alive may be specified by the Registrar using the Flow-Timer: header in 2xx responses to REGISTERs.

When using TCP or TLS as the SIP transport care should be taken to set the tcp_connection_lifetime on the Edge Proxy to a value slightly larger than the interval the Registrar is using for flow timer. Setting tcp_connection_lifetime to less than the interval could cause connections to be lost, and setting it to a value much larger than the interval will keep connections open far longer than is required (which is wasteful).

Application-layer keep-alives are optional when the underlying transport already has a keep-alive mechanism. The WebSocket transport has a transport-layer keep-alive. When using the WebSocket transport the keepalive_timeout should be set to a value a little greater than the Registrar flow timer interval and a little less than the tcp_connection_lifetime.

Example 1.1. Edge Proxy Configuration

#!KAMAILIO
#
# Edge proxy configuration
#

#!subst "/REGISTRAR_IP/192.168.122.3/"
#!subst "/REGISTRAR_PORT/5060/"
#!substdef "/FLOW_TIMER/20/"

####### Global Parameters #########

debug=2
log_stderror=no
log_facility=LOG_LOCAL0
fork=yes
children=4
alias="example.com"
mpath="/usr/lib64/kamailio/modules"
tcp_connection_lifetime=30 # FLOW_TIMER + 10
force_rport=yes


####### Modules Section ########

loadmodule "tm.so"
loadmodule "sl.so"
loadmodule "outbound.so"
loadmodule "rr.so"
loadmodule "path.so"
loadmodule "pv.so"
loadmodule "maxfwd.so"
loadmodule "xlog.so"
loadmodule "sanity.so"
loadmodule "ctl.so"
loadmodule "textops.so"
loadmodule "siputils.so"
loadmodule "stun.so"

# ----------------- setting module-specific parameters ---------------

# ----- tm params -----
modparam("tm", "failure_reply_mode", 3)

# ----- rr params -----
modparam("rr", "append_fromtag", 0)


####### Routing Logic ########

request_route {
	route(REQINIT);

	if (is_method("CANCEL")) {
		if (t_check_trans()) {
			route(RELAY);
		}
		exit;
	}

	route(WITHINDLG);

	t_check_trans();

	if (is_method("REGISTER")) {
		remove_hf("Route");
		add_path();
		$du = "sip:REGISTRAR_IP:REGISTRAR_PORT";
	} else {
		if (is_method("INVITE|SUBSCRIBE"))
			record_route();

		if (@via[2] == "") {
			# From client so route to registrar...

			if ($rU == $null) {
				sl_send_reply("484", "Address Incomplete");
				exit;
			}
			remove_hf("Route");
			$du = "sip:REGISTRAR_IP:REGISTRAR_PORT";
		} else {
			# From registrar so route using "Route:" headers...

			if (!loose_route()) {
				switch($rc) {
				case -2:
					sl_send_reply("403", "Forbidden");
					exit;
				default:
					xlog("L_ERR", "in request_route\n");
					sl_reply_error();
					exit;
				}
			}

			t_on_failure("FAIL_OUTBOUND");
		}
	}

	route(RELAY);
}

route[RELAY] {
	if (!t_relay()) {
		sl_reply_error();
	}
	exit;
}

route[REQINIT] {
	if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483","Too Many Hops");
		exit;
	}

	if(!sanity_check("1511", "7"))
	{
		xlog("Malformed SIP message from $si:$sp\n");
		exit;
	}
}

route[WITHINDLG] {
	if (has_totag()) {
		if (!loose_route()) {
			switch($rc) {
			case -2:
				sl_send_reply("403", "Forbidden");
				exit;
			default:
				if (is_method("ACK")) {
					if ( t_check_trans() ) {
						route(RELAY);
						exit;
					} else {
						exit;
					}
				}
				sl_send_reply("404","Not Found");
			}
		} else {
			if (is_method("NOTIFY")) {
				record_route();
			}
			route(RELAY);
		}
		exit;
	}
}

onreply_route {
	if (!t_check_trans()) {
		drop;
	}

	if ($rm == "REGISTER" && $rs >= 200 && $rs <= 299) {
		remove_hf("Flow-Timer");
		if ($(hdr(Require)[*])=~"outbound")
			insert_hf("Flow-Timer: FLOW_TIMER\r\n", "Call-ID");
	}
}

failure_route[FAIL_OUTBOUND] {
	if (t_branch_timeout() || !t_branch_replied()) {
		send_reply("430", "Flow Failed");
	}
}

Example 1.2. Registrar Configuration

MAILIO
#
# Registrar configuration
#


####### Global Parameters #########

debug=2
log_stderror=no
log_facility=LOG_LOCAL0
fork=yes
children=4
alias="example.com"
mpath="/usr/lib64/kamailio/modules"


####### Modules Section ########

loadmodule "tm.so"
loadmodule "tmx.so"
loadmodule "sl.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "maxfwd.so"
loadmodule "xlog.so"
loadmodule "sanity.so"
loadmodule "ctl.so"
loadmodule "textops.so"
loadmodule "siputils.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"

# ----------------- setting module-specific parameters ---------------


# ----- tm params -----
modparam("tm", "failure_reply_mode", 3)
modparam("tm", "restart_fr_on_each_reply", 0)
modparam("tm", "contact_flows_avp", "tm_contact_flows")
modparam("tm", "contacts_avp", "tm_contacts")

# ----- rr params -----
modparam("rr", "append_fromtag", 0)

# ----- registrar params -----
modparam("registrar", "use_path", 1)
modparam("registrar", "gruu_enabled", 1)
modparam("registrar", "outbound_mode", 1)


####### Routing Logic ########

request_route {
	route(REQINIT);

	if (is_method("CANCEL")) {
		if (t_check_trans()) {
			route(RELAY);
		}
		exit;
	}

	route(WITHINDLG);

	t_check_trans();

	remove_hf("Route");
	if (is_method("INVITE|SUBSCRIBE"))
		record_route();

	route(REGISTRAR);

	if ($rU==$null) {
		xlog("L_INFO", "Address Incomplete\n");
		send_reply("484","Address Incomplete");
		exit;
	}

	route(LOCATION);
}


route[RELAY] {
	if (!t_relay()) {
		xlog("L_ERR", "t_relay() failed\n");
		sl_reply_error();
	}
	exit;
}

route[REQINIT] {
	if (!mf_process_maxfwd_header("10")) {
		xlog("L_INFO", "Too Many Hops\n");
		send_reply("483","Too Many Hops");
		exit;
	}

	if(!sanity_check("1511", "7"))
	{
		xlog("Malformed SIP message from $si:$sp\n");
		exit;
	}
}

route[WITHINDLG] {
	if (has_totag()) {
		if (loose_route()) {
			if (is_method("NOTIFY")) {
				record_route();
			}
			route(RELAY);
		} else {
			if (is_method("ACK")) {
				if (t_check_trans()) {
					route(RELAY);
					exit;
				} else {
					exit;
				}
			}
			xlog("L_INFO", "Not Found");
			send_reply("404","Not Found");
		}
		exit;
	}
}

route[REGISTRAR] {
	if (is_method("REGISTER"))
	{
		if (!save("location")) {
			xlog("L_ERR", "Unable to save location\n");
			sl_reply_error();
		}
		exit;
	}
}

route[LOCATION] {
	if (!lookup("location")) {
		$var(rc) = $rc;
		t_newtran();
		switch ($var(rc)) {
			case -1:
			case -3:
				send_reply("404", "Not Found");
				exit;
			case -2:
				send_reply("405", "Method Not Allowed");
				exit;
		}
	}

	if (!t_load_contacts() || !t_next_contacts()) {
		xlog("L_ERR", "t_(load|next)_contacts() failed\n");
		sl_reply_error();
		exit;
	}

	t_on_failure("FAIL_TRANSACTION");
	t_on_branch_failure("FAIL-BRANCH");
	route(RELAY);
	exit;
}

onreply_route {
	if (!t_check_trans()) {
		drop;
	}
}

failure_route[FAIL_TRANSACTION] {
	if (!t_check_status("6[0-9][0-9]")) {
		if (t_next_contacts()) {
			t_relay();
			exit;
		}
	}

	if (t_check_status("430")) {
		t_reply("480", "Temporarily Unavailable");
		exit;
	}
}

event_route[tm:branch-failure:FAIL-BRANCH] {
	if (t_check_status("403|430")
			|| (t_branch_timeout() && !t_branch_replied())) {
		unregister("location", "$tu", "$T_reply_ruid");

		if (t_next_contact_flow()) {
			t_on_branch_failure("FAIL-BRANCH");
			t_relay();
		}
	}
}

2. Dependencies

2.1. Kamailio Modules

The following modules must be loaded before this module:

  • None

The following modules are required to make proper use of this module:

  • stun.

2.2. External Libraries or Applications

The following libraries must be installed before running Kamailio with this module loaded:

3. Parameters

3.1. force_outbound_flag (integer)

A flag which, if set for a request, will force path and rr to add flow tokens to Path: and Record-Route: headers regardless of the request contents.

Default value is -1.

Example 1.3. Set force_outbound_flag parameter

...
modparam("outbound", "force_outbound_flag", 1)
...

3.2. force_no_outbound_flag (integer)

A flag which, if set for a request, will force path and rr not to add flow tokens to Path: and Record-Route: headers regardless of the request contents.

Default value is -1.

Example 1.4. Set force_no_outbound_flag parameter

...
modparam("outbound", "force_no_outbound_flag", 2)
...