The IMS QoS Module

Dragos Vingarzan

Core Network Dynamics (ex FhG Fokus)

Jason Penton

Smile Communications

Richard Good

Smile Communications

Carsten Bock

ng-voice GmbH

Table of Contents

1. Admin Guide
1. Overview
2. Dependencies
2.1. Kamailio Modules
2.2. External Libraries or Applications
3. Parameters
3.1. rx_dest_realm (string)
3.2. rx_forced_peer (string)
3.3. rx_auth_expiry (integer)
3.4. cdp_event_latency (integer)
3.5. cdp_event_threshold (integer)
3.6. cdp_event_latency_log (integer)
3.7. authorize_video_flow (integer)
3.8. cdp_event_list_size_threshold (integer)
3.9. audio_default_bandwidth (integer)
3.10. video_default_bandwidth (integer)
3.11. early_qosrelease_reason (String)
3.12. confirmed_qosrelease_headers (String)
3.13. regex_sdp_ip_prefix_to_maintain_in_fd (String)
3.14. terminate_dialog_on_rx_failure integer
3.15. delete_contact_on_rx_failure integer
3.16. include_rtcp_fd integer
4. Functions
4.1. Rx_AAR_Register(route_block, domain)
4.2. Rx_AAR(route_block, direction, subscription_id, subscription_id_type)
5. Statistics
5.1. AAR Timeouts (aar_timeouts)
5.2. Average AAR Response Time (aar_avg_response_time)

List of Examples

1.1. rx_dest_realm parameter usage
1.2. rx_forced_peer parameter usage
1.3. rx_auth_expiry parameter usage
1.4. cdp_event_latency parameter usage
1.5. cdp_event_threshold parameter usage
1.6. cdp_event_latency_log parameter usage
1.7. authorize_video_flow parameter usage
1.8. cdp_event_list_size_threshold parameter usage
1.9. audio_default_bandwidth parameter usage
1.10. video_default_bandwidth parameter usage
1.11. early_qosrelease_reason parameter usage
1.12. confirmed_qosrelease_headers parameter usage
1.13. regex_sdp_ip_prefix_to_maintain_in_fd parameter usage
1.14. terminate_dialog_on_rx_failure parameter usage
1.15. delete_contact_on_rx_failure parameter usage
1.16. include_rtcp_fd parameter usage
1.17. Rx_AAR_Register
1.18. Rx_AAR

Chapter 1. Admin Guide

1. Overview

This module contains all method related to the IMS policy and charging control functions performed by an Application Function (e.g. P-CSCF) over the Rx interface. This module is dependent on the CDP (C Diameter Peer) modules for communicating with PCRF as specified in 3GPP specification TS 29.214.

2. Dependencies

2.1. Kamailio Modules

The Following modules must be loaded before this module:

  • Dialog

  • Usrloc PCSCF

  • TM - Transaction Manager

  • CDP - C Diameter Peer

  • CDP_AVP - CDP AVP Applications

2.2. External Libraries or Applications

This modules requires the internal IMS library.

3. Parameters

3.1. rx_dest_realm (string)

This is the name of the Diameter realm of the Diameter server (typically a PCRF).

Default value is 'ims.smilecoms.com'.

Example 1.1. rx_dest_realm parameter usage

...
modparam("ims_qos", "rx_dest_realm", "ims.smilecoms.com")
...

3.2. rx_forced_peer (string)

FQDN of the Diameter server (typically a PCRF) to communicate with. If not set then realm routing is used. If you use this, the routing defined in your diameter xml configuration file (CDP) will be ignored and as a result you will lose the benefits of load balancing and failover.

Default value is ''.

Example 1.2. rx_forced_peer parameter usage

...
modparam("ims_qos", "rx_forced_peer", "pcrf.ims.smilecoms.com")
...

3.3. rx_auth_expiry (integer)

This is the expiry length in seconds of the initiated Diameter sessions.

Default value is 7200.

Example 1.3. rx_auth_expiry parameter usage

...
modparam("ims_qos", "rx_auth_expiry", 14400)
...

3.4. cdp_event_latency (integer)

This is a flag to determine whether or slow CDP responses should be reported in the log file. 1 is enabled and 0 is disabled.

Default value is 1.

Example 1.4. cdp_event_latency parameter usage

...
modparam("ims_qos", "cdp_event_latency", 1)
...

3.5. cdp_event_threshold (integer)

This time in milliseconds is the limit we should report a CDP response as slow. i.e. if a CDP response exceeds this limit it will be reported in the log file. This is only relevant is cdp_event_latency is enabled (set to 0).

Default value is 500.

Example 1.5. cdp_event_threshold parameter usage

...
modparam("ims_qos", "cdp_event_threshold", 500)
...

3.6. cdp_event_latency_log (integer)

This time log level at which we should report slow CDP responses. 0 is ERROR, 1 is WARN, 2 is INFO and 3 is DEBUG. This is only relevant is cdp_event_latency is enabled (set to 0)

Default value is 0.

Example 1.6. cdp_event_latency_log parameter usage

...
modparam("ims_qos", "cdp_event_latency_log", 1)
...

3.7. authorize_video_flow (integer)

This is a flag that specifies whether or not to authorize video flows. 1 means video flows will be authorized over Rx and 0 means video flows will not be authorized over Rx

Default value is 1.

Example 1.7. authorize_video_flow parameter usage

...
modparam("ims_qos", "authorize_video_flow", 0)
...

3.8. cdp_event_list_size_threshold (integer)

This is a threshold on the size of the cdp event list. Once the queue exceeds this length a warning is logged. 0 disables this feature

Default value is 0.

Example 1.8. cdp_event_list_size_threshold parameter usage

...
modparam("ims_qos", "cdp_event_list_size_threshold", 10)
...

3.9. audio_default_bandwidth (integer)

This parameters defines the default bandwidth for Audio, if no "b=AS"-Parameter is found in the SDP.

Default value is 64 (64 kBit)

Example 1.9. audio_default_bandwidth parameter usage

...
modparam("ims_qos", "audio_default_bandwidth", 32)
...

3.10. video_default_bandwidth (integer)

This parameters defines the default bandwidth for Video, if no "b=AS"-Parameter is found in the SDP.

Default value is 128 (128 kBit)

Example 1.10. video_default_bandwidth parameter usage

...
modparam("ims_qos", "video_default_bandwidth", 256)
...

3.11. early_qosrelease_reason (String)

This sets the default Reason, when a call is terminated in early stage due to QoS-failure.

Default value is "QoS released", a call in early stage would be released with "488 QoS released".

Example 1.11. early_qosrelease_reason parameter usage

...
modparam("ims_qos", "early_qosrelease_reason", "Sorry - QoS failed")
...

3.12. confirmed_qosrelease_headers (String)

These headers are added to the BYE-Message, when a confirmed call is terminated due to a QoS failure.

Default value is "", no Extra-Headers

The headers must end with CRLF.

Example 1.12. confirmed_qosrelease_headers parameter usage

...
modparam("ims_qos", "confirmed_qosrelease_headers", "X-Reason: QoS failed\r\n")
...

3.13. regex_sdp_ip_prefix_to_maintain_in_fd (String)

The flow-description AVP is typically populated using IP:port information present in the SDP. Certain (buggy) UEs can change ports midway during calls which causes the flow-description to no longer match the traffic. This parameter allows the flow-description AVP to use to the any keyword instead of certain IP:port combinations in the SDP. The parameter is a regex that if set adds an extra filter for all IPs that do not match the regex with the any keyword in the flow-description AVP

Default value is "", no extra filters added

Example 1.13. regex_sdp_ip_prefix_to_maintain_in_fd parameter usage

...
modparam("ims_qos", "regex_sdp_ip_prefix_to_maintain_in_fd", "10.21.0.1")
...

3.14. terminate_dialog_on_rx_failure integer

If set then active dialogs associated with an Rx session are torn down in the Rx session fails

Default value is 1, dialogs are torn down

Example 1.14. terminate_dialog_on_rx_failure parameter usage

...
modparam("ims_qos", "terminate_dialog_on_rx_failure", 0)
...

3.15. delete_contact_on_rx_failure integer

If set then contacts associated with signalling Rx sessions are deleted if the Rx session fails

Default value is 1, contacts are deleted

Example 1.15. delete_contact_on_rx_failure parameter usage

...
modparam("ims_qos", "delete_contact_on_rx_failure", 0)
...

3.16. include_rtcp_fd integer

If set then a flow description is added for media flows - next available odd port is used as the default for RTCP traffic

Default value is 0, RTCP flow description not added

Example 1.16. include_rtcp_fd parameter usage

...
modparam("ims_qos", "include_rtcp_fd", 1)
...

4. Functions

4.1. Rx_AAR_Register(route_block, domain)

Perform an AAR on Diameter RX interface to subscribe to signalling status. This purpose of this is tell a Diameter server (typically a PCRF) to inform the requesting Diameter client on changes to the status of signalling bearer for the same framed IP address. For more details see 3GGP TS 29.214.

Meaning of the parameters is as follows:

  • Route block to resume after async UAR Diameter reply.

  • domain that usrloc_pcscf uses to store user information.

Return codes:

  • -1 - error: There was an error, so we must either ignore it (no subscription) or send 403 (depends on behaviour you want)

    0 - Success: AAR-Request sent, reply is processed asynchronously.

    1 - Success: No need to send AAR-Request, as a subscription still exists (continue as normal)

This function can be used from REQUEST_ROUTE.

p.s. this is executed asynchronously. See example on how to retrieve return value

Example 1.17. Rx_AAR_Register

...
if(Rx_AAR_Register("REG_AAR_REPLY","location")==0){
    exit;
}
...
route[REG_AAR_REPLY]
{
    switch ($avp(s:aar_return_code)) {
        case 1:
            xlog("L_DBG", "Diameter: AAR success on subscription to signalling\n");
            break;
        default:
            xlog("L_ERR", "Diameter: AAR failed on subscription to signalling\n");
            t_reply("403", "Can't register to QoS for signalling");
            exit;
    }
...

4.2. Rx_AAR(route_block, direction, subscription_id, subscription_id_type)

Perform an AAR on Diameter RX interface to request resource authorisation from a Diameter server (typically a PCRF). For more details see 3GGP TS 29.214.

Meaning of the parameters is as follows:

  • Route block to resume after async UAR Diameter reply.

  • direction of this message - orig, term, etc.

  • subscription_id to hard code subscription ID for AAR. Used for some broken PCRFs. Leave blank to use default

  • subscription_id_type to hard code subscription ID type for AAR. Only applicable if subscription_id is set. Set to -1 to use default. This is as per RFC 4006: END_USER_E164 0, END_USER_IMSI 1, END_USER_SIP_URI 2, END_USER_NAI 3, END_USER_PRIVATE 4

This function can be used from REQUEST_ROUTE or ONREPLY_ROUTE.

p.s. this is executed asynchronously. See example on how to retrieve return value

Example 1.18. Rx_AAR

...
if(Rx_AAR("ORIG_SESSION_AAR_REPLY","orig","",-1)==0){
    exit;
}
...
route[ORIGN_SESSION_AAR_REPLY]
{
    if ($avp(s:aar_return_code) != 1) {
        xlog("L_ERR", "IMS: AAR failed Orig\n");
        dlg_terminate("all", "Sorry no QoS available");
    } else {
        xlog("L_DBG", "Diameter: Orig AAR success on media authorization\n");
    } 
}
...

5. Statistics

5.1. AAR Timeouts (aar_timeouts)

The number of timeouts on sending an AAR. i.e. no response to AAR.

5.2. Average AAR Response Time (aar_avg_response_time)

The average response time in milliseconds for AAR-AAA transaction.