MSRP Module

Daniel-Constantin Mierla

Edited by

Daniel-Constantin Mierla

Edited by

Alex Balashov


Table of Contents

1. Admin Guide
1. Overview
2. Dependencies
2.1. Kamailio Modules
2.2. External Libraries or Applications
3. Parameters
3.1. sipmsg (int)
3.2. cmap_size (int)
3.3. timer_interval (int)
3.4. auth_min_expires (int)
3.5. auth_max_expires (int)
3.6. use_path_addr (str)
4. Functions
4.1. msrp_relay()
4.2. msrp_reply(code, text [, hdrs])
4.3. msrp_is_request()
4.4. msrp_is_reply()
4.5. msrp_set_dst(addr, sock)
4.6. msrp_relay_flags(flags)
4.7. msrp_reply_flags(flags)
4.8. msrp_cmap_save()
4.9. msrp_cmap_lookup()
5. Pseudo Variables
6. RPC Commands
6.1. msrp.cmaplist
7. Event Routes
8. Usage

List of Examples

1.1. Set sipmsg parameter
1.2. Set cmap_size parameter
1.3. Set timer_interval parameter
1.4. Set auth_min_expires parameter
1.5. Set auth_max_expires parameter
1.6. Set use_path_addr parameter
1.7. msrp_relay usage
1.8. msrp_reply usage
1.9. msrp_is_request usage
1.10. msrp_is_reply usage
1.11. msrp_set_dst usage
1.12. msrp_relay_flags usage
1.13. msrp_reply_flags usage
1.14. msrp_cmap_save usage
1.15. msrp_cmap_lookup usage
1.16. Event Route (using htable for MSRP connection tracking)
1.17. Event Route (using msrp_cmap_ functions for connection tracking)

Chapter 1. Admin Guide

1. Overview

This module provides a MSRP routing engine, a.k.a. MSRP relay. MSRP (Message Session Relay Protocol) is defined by RFC4975, and the extensions for an MSRP relay are covered in RFC4976.

A typical use of MSRP is instant messaging sessions initiated via SIP. Unlike page-mode instant messaging, which is done via the SIP MESSAGE request, MSRP uses a different communication channel which is negotiated via INVITE-200 OK-ACK.

However, MSRP is still a text-based protocol. It uses several routing mechanisms similar to what exists in SIP. Furthermore, MSRP requires TCP, and recommends TLS for confidentiality and security. In light of the scalability and performance of Kamailio in handling TCP/TLS, this module reuses Kamailio's core framework to offer MSRP routing capabilities. Along with embedded Presence and XCAP servers, Kamailio now offers a complete solution for SIP beyond VoIP.

One of the main benefits of this module is the ability to reuse all the other extensions that exist in the SIP server, including accounting, authentication, authorization to database connectors, security and DoS attack protections.

Kamailio can handle SIP and MSRP traffic received on the same port; the appropriate configuration file block being executed based on the type of message. Therefore, you can use Kamailio as a stand-alone MSRP relay or you can have an instance handling both SIP and MSRP. Another option is to configure Kamailio to listen on multiple ports, some of them for SIP and others for MSRP.

2. Dependencies

2.1. Kamailio Modules

The following modules must be loaded before this module:

  • None.

The following modules are required to make proper use of this module:

  • tls.

2.2. External Libraries or Applications

The following libraries or applications must be installed before running Kamailio with this module loaded:

  • None

3. Parameters

3.1. sipmsg (int)

If set to 1, the module will build a SIP message from MSRP frame headers, providing it to event_route[msrp:frame-in]. All the config file functions (apart from SIP request relay) that can be used in a request route block can be used in the MSRP event_route.

Default value is '1'.

Example 1.1. Set sipmsg parameter

...
modparam("msrp", "sipmsg", 1)
...

3.2. cmap_size (int)

The size of connection map table, to be computed as power of 2 (e.g., if the value is 4, then the number of slots in map table is 2^4 = 16).

Default value is '0' (no internal map table to be used).

Example 1.2. Set cmap_size parameter

...
modparam("msrp", "cmap_size", 8)
...

3.3. timer_interval (int)

The timer interval in seconds to run the procedure for cleaning expired connections.

Default value is '60'.

Example 1.3. Set timer_interval parameter

...
modparam("msrp", "timer_interval", 90)
...

3.4. auth_min_expires (int)

The minimum value accepted for the Expires header in AUTH requests.

Default value is '60'.

Example 1.4. Set auth_min_expires parameter

...
modparam("msrp", "auth_min_expiresl", 90)
...

3.5. auth_max_expires (int)

The maximum value accepted for Expires header in AUTH requests.

Default value is '3600'.

Example 1.5. Set auth_max_expires parameter

...
modparam("msrp", "auth_max_expiresl", 1800)
...

3.6. use_path_addr (str)

The hostname:port to be used when building the Path header.

Default value is NULL (server IP and port are used).

Example 1.6. Set use_path_addr parameter

...
modparam("msrp", "use_path_addr", "msrp.kamailio.org:5061")
...

4. Functions

4.1.  msrp_relay()

Relay MSRP frame according to the To-Path. This function has to be executed for each MSRP request or reply that has to be forwarded. Note that due to nature of the MSRP transport layer, which is reliable (TCP/TLS), there is no retransmission of MSRP frames.

This function can be used in ANY_ROUTE.

Example 1.7. msrp_relay usage

...
event_route[msrp:frame-in] {
    msrp_relay();
}
...

4.2.  msrp_reply(code, text [, hdrs])

Send a reply for the current MSRP request, adding optional headers.

The parameter can be a pseudo-variable.

This function can be used in ANY_ROUTE.

Example 1.8. msrp_reply usage

...
event_route[msrp:frame-in] {
    msrp_reply("403", "Not allowed");
}
...

4.3.  msrp_is_request()

Return true if the MSRP frame is a request.

This function can be used in ANY_ROUTE.

Example 1.9. msrp_is_request usage

...
event_route[msrp:frame-in] {
    if(msrp_is_request())
    {
        msrp_relay();
        exit;
    }
}
...

4.4.  msrp_is_reply()

Return true if the MSRP frame is a reply.

This function can be used in ANY_ROUTE.

Example 1.10. msrp_is_reply usage

...
event_route[msrp:frame-in] {
    if(msrp_is_reply())
    {
        msrp_relay();
        exit;
    }
}
...

4.5.  msrp_set_dst(addr, sock)

Set destination attributes: addr - target address as MSRP URI; sock - local socket to be used (format 'proto:ip:port').

The parameter can be a pseudo-variable.

This function can be used in ANY_ROUTE.

Example 1.11. msrp_set_dst usage

...
event_route[msrp:frame-in] {
    ...
    msrp_set_dst("msrp://127.0.0.1:8000", "tcp:127.0.0.1:5060");
    ...
}
...

4.6.  msrp_relay_flags(flags)

Set transport layer sending flags for forwarding current MSRP frame; flags - a bitmask of flags - 1 (don't create a new connection), 2 (close connection after send).

The parameter can be a pseudo-variable.

This function can be used in ANY_ROUTE.

Example 1.12. msrp_relay_flags usage

...
event_route[msrp:frame-in] {
    ...
    msrp_relay_flags("1");
    ...
}
...

4.7.  msrp_reply_flags(flags)

Set transport layer sending flags for replies to the current MSRP frame; flags - a bitmask of flags - 1 (don't create a new connection), 2 (close connection after send).

The parameter can be a pseudo-variable.

This function can be used in ANY_ROUTE.

Example 1.13. msrp_reply_flags usage

...
event_route[msrp:frame-in] {
    ...
    msrp_reply_flags("1");
    ...
}
...

4.8.  msrp_cmap_save()

Save details of a MSRP connection upon AUTH request inside the internal map table, indexed by session id.

This function can be used in ANY_ROUTE.

Example 1.14. msrp_cmap_save usage

...
event_route[msrp:frame-in] {
    ...
	if(method=="AUTH") { msrp_cmap_save(); exit; }
    ...
}
...

4.9.  msrp_cmap_lookup()

Lookup MSRP connection details for current session id.

This function can be used in ANY_ROUTE.

Example 1.15. msrp_cmap_lookup usage

...
event_route[msrp:frame-in] {
    ...
	if(method=="SEND" and $msrp(nexthops)==1) {
		if(msrp_cmap_lookup()) {
			msrp_relay();
		} else {
			msrp_reply("481", "Session not found");
		}
	}
    ...
}
...

5. Pseudo Variables

The module exports a pseudo-variable class, $msrp(key), to access the MSRP frame (e.g. first line attributes, body, all frame content).

The module exports a transformations class, 'msrpuri', to allow access attributes of a MSRP URI.

These are documented in the appropriate Wiki pages hosted on the project web site.

6. RPC Commands

6.1.  msrp.cmaplist

List active MSRP connections.

Example:

...
kamcmd msrp.cmaplist
...

7. Event Routes

For each MSRP frame received from the network, the module executes event_route[msrp:frame-in] block in the config file.

8. Usage

When the sipmsg parameter is set to 1 (which is the default), the module internally builds a SIP request from the MSRP frame and exposes it to the config file interpreter. This way, all the functions that are valid for SIP requests can be used safely in event_route[msrp:frame-in].

To build the SIP request, the module takes the first line and the headers from an MSRP message and appends them to a static buffer. The next two examples show an MSRP frame and the resulting SIP request.

...
MSRP 6aef SEND
To-Path: msrps://a.example.org:9000/kjfjan;tcp \
  msrps://b.example.net:9000/aeiug;tcp \
  msrps://bob.example.net:8145/foo;tcp
From-Path: msrps://alice.example.org:7965/bar;tcp
Success-Report: yes
Byte-Range: 1-*/*
Message-ID: 87652
Content-Type: text/plain

Hi Bob, I'm about to send you a photo.
-------6aef$
...
...
MSRP sip:a@127.0.0.1 SIP/2.0
Via: SIP/2.0/UDP 127.0.0.1:9;branch=z9hG4bKa
From: <b@127.0.0.1>;tag=a
To: <a@127.0.0.1>
Call-ID: a
CSeq: 1 MSRP
Content-Length: 0
MSRP-First-Line: MSRP 6aef SEND
To-Path: msrps://a.example.org:9000/kjfjan;tcp \
  msrps://b.example.net:9000/aeiug;tcp \
  msrps://bob.example.net:8145/foo;tcp
From-Path: msrps://alice.example.org:7965/bar;tcp
Success-Report: yes
Byte-Range: 1-*/*
Message-ID: 87652
Content-Type: text/plain

...

Note that MSRP does not permit line folding. A "\" in the examples shows a line continuation due to the limitations of line length of this document. Neither the backslash nor the extra CRLF is included in the actual request or response.

As can be observed, the MSRP frame content starts with the body of the 'MSRP-First-Line:' header. Using static content to get to a valid SIP request is a perfect trade-off for performance.

Besides the option to access parts of MSRP frame via an internally-built SIP message, the module exports a new pseudo-variable class $msrp(key) which returns attributes from the MSRP frame. There is also a new transformation, {msrpuri.key}, to get access to parts of an MSRP URI. See the appropriate Wiki pages on the project's web site for full details about new pseudo-variable and transformation classes.

Next is an example of configuration file with the routing block for MSRP frames. In this config, the SIP traffic is rejected.

Example 1.16. Event Route (using htable for MSRP connection tracking)

...

#!KAMAILIO

debug=2
memdbg=5
memlog=5

children=4

log_stderror=yes
auto_aliases=no

tcp_accept_no_cl=yes
tcp_connection_lifetime=1810

listen=127.0.0.1:5060

mpath="modules_k/:modules/"

loadmodule "sl.so"
loadmodule "kex.so"
loadmodule "mi_fifo.so"
loadmodule "ctl.so"
loadmodule "msrp.so"
loadmodule "pv.so"
loadmodule "auth.so"
loadmodule "cfgutils.so"
loadmodule "htable.so"
loadmodule "xlog.so"

modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo")

modparam("auth", "nonce_count", 1)
modparam("auth", "qop", "auth")

#!substdef "!MSRP_MIN_EXPIRES!1800!g"
#!substdef "!MSRP_MAX_EXPIRES!3600!g"
modparam("htable", "htable", "msrp=>size=8;autoexpire=MSRP_MAX_EXPIRES;")

request_route {
	sl_send_reply("403", "No SIP Here");
	exit;
}

reply_route {
	drop;
}

event_route[msrp:frame-in] {
	xdbg("============#[[$msrp(method)]]===========\n");
	xdbg("============*[[$si:$sp]]\n");
	xdbg("============ crthop:   [$msrp(crthop)]\n");
	xdbg("============ prevhop:  [$msrp(prevhop)]\n");
	xdbg("============ nexthop:  [$msrp(nexthop)]\n");
	xdbg("============ firsthop: [$msrp(firsthop)]\n");
	xdbg("============ lasthop:  [$msrp(lasthop)]\n");
	xdbg("============ prevhops: [$msrp(prevhops)]\n");
	xdbg("============ nexthops: [$msrp(nexthops)]\n");
	xdbg("============ srcaddr:  [$msrp(srcaddr)]\n");
	xdbg("============ srcsock:  [$msrp(srcsock)]\n");
	xdbg("============ sessid:   [$msrp(sessid)]\n");

	msrp_reply_flags("1");

	if(msrp_is_reply())
	{
		msrp_relay();
	}
	else if($msrp(method)=="AUTH")
	{
		if($msrp(nexthops)>0)
		{
			msrp_relay();
			exit;
		}

		# frame for local server - send Use-Path
		# -- passwd can be loaded from DB based on $au
		$var(passwd) = "xyz123";
		if(!pv_www_authenticate("myrealm", "$var(passwd)", "0",
					"$msrp(method)"))
		{
			if(auth_get_www_authenticate("myrealm", "1",
							"$var(wauth)"))
			{
				msrp_reply("401", "Unauthorized",
						"$var(wauth)");
			} else {
				msrp_reply("500", "Server Error");
			}
			exit;
		}

		if ($hdr(Expires) != $null) {
			$var(expires) = (int) $hdr(Expires);
			if ($var(expires) < MSRP_MIN_EXPIRES) {
				msrp_reply("423", "Interval Out-of-Bounds",
					"Min-Expires: MSRP_MIN_EXPIRES\r\n");
				exit;
			} else {
				msrp_reply("423", "Interval Out-of-Bounds",
					"Max-Expires: MSRP_MAX_EXPIRES\r\n");
				exit;
			}

		} else
			$var(expires) = MSRP_MAX_EXPIRES;
		
		$var(cnt) = $var(cnt) + 1;
		pv_printf("$var(sessid)", "s.$(pp).$(var(cnt)).$(RANDOM)");
		$sht(msrp=>$var(sessid)::srcaddr) = $msrp(srcaddr);
		$sht(msrp=>$var(sessid)::srcsock) = $msrp(srcsock);
		$shtex(msrp=>$var(sessid)) = $var(expires) + 5;
		# - Use-Path: the MSRP address for server + session id
		$var(headers) = "Use-Path: msrp://127.0.0.1:5060/"
				+ $var(sessid) + ";tcp\r\n"
				+ "Expires: " + $var(expires) + "\r\n";
		msrp_reply("200", "OK", "$var(headers)");
	}
	else if($msrp(method)=="SEND" || $msrp(method)=="REPORT")
	{
		if($msrp(nexthops)>1)
		{
			if ($msrp(method)!="REPORT")
			{
				msrp_reply("200", "OK");
			}
			msrp_relay();
			exit;
		}
		$var(sessid) = $msrp(sessid);
		if($sht(msrp=>$var(sessid)::srcaddr) == $null)
		{
			# one more hop, but we don't have address in htable
			if ($msrp(method)!="REPORT")
			{
				msrp_reply("481", "Session-does-not-exist");
			}
			exit;
		}
		else if($msrp(method)!="REPORT")
		{
			msrp_reply("200", "OK");
		}
		msrp_relay_flags("1");
		msrp_set_dst("$sht(msrp=>$var(sessid)::srcaddr)",
				"$sht(msrp=>$var(sessid)::srcsock)");
		msrp_relay();
	}
	else
	{
		msrp_reply("501", "Request-method-not-understood");
	}
}

...

Example 1.17. Event Route (using msrp_cmap_ functions for connection tracking)

...

#!KAMAILIO

debug=2
memdbg=5
memlog=5

children=4

log_stderror=yes
auto_aliases=no

tcp_accept_no_cl=yes
tcp_connection_lifetime=1810

listen=127.0.0.1:5060

mpath="modules_k/:modules/"

loadmodule "sl.so"
loadmodule "kex.so"
loadmodule "mi_fifo.so"
loadmodule "ctl.so"
loadmodule "msrp.so"
loadmodule "pv.so"
loadmodule "auth.so"
loadmodule "cfgutils.so"
loadmodule "xlog.so"

modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo")

modparam("auth", "nonce_count", 1)
modparam("auth", "qop", "auth")

modparam("msrp", "cmap_size", 8)
modparam("msrp", "use_path_addr", "msrp://127.0.0.1:5060")

request_route {
	sl_send_reply("403", "No SIP Here");
	exit;
}

reply_route {
	drop;
}

event_route[msrp:frame-in] {
	xdbg("============#[[$msrp(method)]]===========\n");
	xdbg("============*[[$si:$sp]]\n");
	xdbg("============ crthop:   [$msrp(crthop)]\n");
	xdbg("============ prevhop:  [$msrp(prevhop)]\n");
	xdbg("============ nexthop:  [$msrp(nexthop)]\n");
	xdbg("============ firsthop: [$msrp(firsthop)]\n");
	xdbg("============ lasthop:  [$msrp(lasthop)]\n");
	xdbg("============ prevhops: [$msrp(prevhops)]\n");
	xdbg("============ nexthops: [$msrp(nexthops)]\n");
	xdbg("============ srcaddr:  [$msrp(srcaddr)]\n");
	xdbg("============ srcsock:  [$msrp(srcsock)]\n");
	xdbg("============ sessid:   [$msrp(sessid)]\n");

	msrp_reply_flags("1");

	if (msrp_is_reply())
	{
		msrp_relay();
	}
	else if($msrp(method)=="AUTH")
	{
		if($msrp(nexthops)>0)
		{
			msrp_relay();
			exit;
		}

		# frame for local server - send Use-Path
		# -- passwd can be loaded from DB based on $au
		$var(passwd) = "xyz123";
		if(!pv_www_authenticate("myrealm", "$var(passwd)", "0",
					"$msrp(method)"))
		{
			if(auth_get_www_authenticate("myrealm", "1",
							"$var(wauth)"))
			{
				msrp_reply("401", "Unauthorized",
						"$var(wauth)");
			} else {
				msrp_reply("500", "Server Error");
			}
			exit;
		}

		msrp_cmap_save();
	}
	else if ($msrp(method)=="SEND" || $msrp(method)=="REPORT")
	{
		if ($msrp(nexthops)>1)
		{
			if ($msrp(method)!="REPORT")
			{
				msrp_reply("200", "OK");
			}
			msrp_relay();
			exit;
		}

		if (msrp_cmap_lookup())
		{
			if ($msrp(method)!="REPORT")
			{
				msrp_reply("200", "OK");
			}
			msrp_relay_flags("1");
			msrp_relay();
		}
		else
		{
			msrp_reply("481", "Session-does-not-exist");
		}
	}
	else
	{
		msrp_reply("501", "Request-method-not-understood");
	}
}

...