xmpp Module

Andreea Spirea

Daniel-Constantin Mierla

Edited by

Andreea Spirea

Revision History
Revision $Revision: 4594 $$Date: 2008-08-06 12:08:33 +0200 (Wed, 06 Aug 2008) $

Table of Contents

1. Admin Guide
1.1. Overview
1.2. Dependencies
1.2.1. Kamailio Modules
1.2.2. External Libraries or Applications
1.3. Exported Parameters
1.3.1. backend(string)
1.3.2. domain_separator (string)
1.3.3. gateway_domain (string)
1.3.4. xmpp_domain (string)
1.3.5. xmpp_host (string)
1.3.6. xmpp_port (integer)
1.3.7. xmpp_password (string)
1.3.8. outbound_proxy (string)
1.4. Exported Functions
1.4.1. xmpp_send_message()
1.5. Configuration

List of Examples

1.1. Set backend parameter
1.2. Set domain_separator parameter
1.3. Set gateway_domain parameter
1.4. Set xmpp_domain parameter
1.5. Set xmpp_host parameter
1.6. Set xmpp_port parameter
1.7. Set xmpp_password parameter
1.8. Set outbound_proxy parameter
1.9. xmpp_send_message() usage

Chapter 1. Admin Guide

1.1. Overview

This module is a gateway between Kamailio and a XMPP/Jabber server. It enables the exchange of instant messages between SIP clients and XMPP(jabber) clients.

The module can be used in two different modes:

  • XMPP Component Mode. In this mode, Kamailio connects to an XMPP server using the standardized XMPP component interface, extending your XMPP services. The connection is done over TCP/IP with authorization.

  • XMPP Server. In this mode, the Kamailio XMPP module is a stand-alone XMPP server, with no requirement for another XMPP server in the system. This server uses XMPP S2S (Server to Server) connections to connect to other XMPP servers or receive connections from other servers. NOTE: this is limited implementation of a XMPP server, it does not support SRV or TLS so far. This mode is in beta stage for the moment.

In the component mode, you need a local XMPP server (recommended Jabberd2). The XMPP module will connect by using TCP/IP connection to the local jabber server. The documentation and the source for Jabberd server are located at the following link: http://jabberd.jabberstudio.org/2/#download

After you have a running XMPP server, what you need to do is set the following parameters in the Kamailio configuration file:

  • gateway_domain, xmpp_domain (which can be the same as gateway_domain) and xmpp_host, which are explained in the Exported Parameters section;

  • listen = your ip;

  • alias=Kamailio SIP domain and alias=gateway domain;

  • in the following section of the configuration file, change to your gateway domain:

 	 ### ---8<--- cut here ---8<--- ###
	if (avp_check("$rd", "eq/s:sip-xmpp.kamailio.org")) {
		if (!t_newtran()) {
			sl_reply_error();
	...........	 
  • you can also define a password for the XMPP Component connection to the Jabber server, which must be the same as the xmpp_password parameter.

A use case, for the component-mode, would look like this:

  • Kamailio is hosting the sip-server.kamailio.org SIP domain

  • The gateway SIP domain is sip-xmpp.kamailio.org

  • The XMPP server is hosting the XMPP domain xmpp.kamailio.org

  • The Component is hosting the XMPP domain xmpp-sip.kamailio.org

In the XMPP stand-alone server mode, the XMPP module is a minimal XMPP/Jabber server. In this mode, another Jabber server is not needed. The gateway will connect to other XMPP servers basaed on the JID domain and by using the standardized XMPP S2S protocol.

If you want to change to server-mode, you have to change the "backend" parameter, as shown in the Exported Parameters section, from "component" to "server".

A use case, for the server-mode, would look like this:

  • Kamailio is hosting the SIP domain sip-server.kamailio.org

  • The gateway is hosting the SIP domain sip-xmpp.kamailio.org;

  • The "XMPP server" is running on xmpp-sip.kamailio.org.

In both cases, the destination address must have the same pattern:

sip:username<delim>jabber_server@gateway_domain

From a jabber client's point of view, the destination will look like:

sip_username<delim>openser_domain@xmpp_domain

1.2. Dependencies

1.2.1. Kamailio Modules

The following modules must be loaded before this module:

  • requires 'tm' module.

1.2.2. External Libraries or Applications

The following libraries or applications must be installed before running Kamailio with this module loaded:

  • expat - used for parsing/building XML. Linux package: libexpat1-devel

1.3. Exported Parameters

1.3.1. backend(string)

The mode you are using the module; it can be either "component" or "server".

Default value is "component".

Example 1.1. Set backend parameter

...
 modparam("xmpp", "backend", "server")
...

1.3.2. domain_separator (string)

In the destination address we need an extra character as a domain separator, apart from @. The address of the XMPP(jabber) client looks like this: "sip:username<domain_separator>jabber_server@gateway_domain". The address of a SIP client has the following pattern : "sip_username<domain_separator>openser_domain@xmpp_domain"; A common used character in XMPP transports is "%".

Default value is "*".

Example 1.2. Set domain_separator parameter

...
 modparam("xmpp", "domain_separator", "%")
...

1.3.3. gateway_domain (string)

The domain of the gateway, which must resolve in DNS. It must be the same with the gateway_domain from the destination address of the XMPP(jabber) client, as seen by the SIP client: "sip:username<delim>jjabber_server@gateway_domain".

Default value is "sip-xmpp.example.org".

Example 1.3. Set gateway_domain parameter

...
 modparam("xmpp", "gateway_domain", "sip-xmpp.kamailio.org")
...

1.3.4. xmpp_domain (string)

The XMPP domain of the component or the server, depending on the mode we are in. It can be the same as the gateway_domain. For a server DNS name, you need to add _xmpp-server._tcp SRV records in your DNS zone to enable connections from other XMPP servers.

Default value is "sip-xmpp.example.org".

Example 1.4. Set xmpp_domain parameter

...
 modparam("xmpp", "xmpp_domain", "xmpp-sip.kamailio.org")
...

1.3.5. xmpp_host (string)

The IP address or the name of the local XMPP/Jabber server, if the backend is set to "component". For server mode, this is the IP address the XMPP component binds to.

Default value is "xmpp.example.org".

Example 1.5. Set xmpp_host parameter

...
 modparam("xmpp", "xmpp_host", "xmpp.kamailio.org")
...

1.3.6. xmpp_port (integer)

In component mode, this is the port the XMPP server component interface listens to. In server mode, this is the port the server listens to.

Default value is "5347", if backend is set to "component" and "5269", if backend is set to "server".

Example 1.6. Set xmpp_port parameter

...
 modparam("xmpp", "xmpp_port", 5269)
...

1.3.7. xmpp_password (string)

The password of the local XMPP server.

This is the password for the component interface on the XMPP server, when connecting as a component. Default password is "secret". When connecting to jabberd2, you need to make sure this is the password configured in the file "c2s.xml". This is how the default configuration for the jabberd2 looks like:

			<router>
	............... 
	<!-- Username/password to authenticate as --&gt;
    <user>jabberd</user>;          <!-- default: jabberd -->;
    <pass>secret</pass>;           <!-- default: secret -->;	
			

Example 1.7. Set xmpp_password parameter

...
 modparam("xmpp", "xmpp_password", "secret")
...

1.3.8. outbound_proxy (string)

The SIP address used as next hop when sending the message. Very useful when using Kamailio with a domain name not in DNS, or when using a separate Kamailio instance for XMPP processing. If not set, the message will be sent to the address in destination URI.

Default value is NULL.

Example 1.8. Set outbound_proxy parameter

...
 modparam("xmpp", "outbound_proxy", "sip:kamailio.org;transport=tcp")
...

1.4. Exported Functions

1.4.1.  xmpp_send_message()

Converts SIP messages to XMPP(jabber) messages, in order to be relayed to a XMPP(jabber) client.

Example 1.9. xmpp_send_message() usage

...
xmpp_send_message();
...

1.5. Configuration

Next is presented a sample configuration file one can use to implement a standalone SIP-to-XMPP gateway. You can run an instance of Kamailio on a separate machine or on different port with the following config, and have the main SIP server configured to forward all SIP requests for XMPP world to it.

....
#
# $Id: openser-xmpp.cfg 4585 2008-08-06 08:20:30Z klaus_darilion $
#
# simple quick-start config script for XMPP GW
#
# make sure in your main SIP server that you send
# only the adequate SIP MESSAGES to XMPP GW
#
#
# ----------- global configuration parameters ------------------------

debug=9            # debug level (cmd line: -dddddddddd)
fork=no
log_stderror=yes    # (cmd line: -E)

/* Uncomment these lines to enter debugging mode 
fork=no
log_stderror=yes
*/

check_via=no	# (cmd. line: -v)
dns=no          # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
children=4

listen=udp:10.10.10.10:5076
alias=sip-xmpp.kamailio.org

# ------------------ module loading ----------------------------------

mpath="/usr/local/openser-1.1.0-xmpp/lib/kamailio/modules/"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "textops.so"
loadmodule "mi_fifo.so"


# XMPP
loadmodule "xmpp.so"

modparam("xmpp", "domain_separator", "*")
modparam("xmpp", "gateway_domain", "sip-xmpp.kamailio.org")
modparam("xmpp", "xmpp_domain", "xmpp-sip.kamailio.org")
modparam("xmpp", "xmpp_host", "xmpp.kamailio.org")

modparam("xmpp", "backend", "server")
# modparam("xmpp", "backend", "component")

# ----------------- setting module-specific parameters ---------------

# -- mi_fifo params --

modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo_xmpp")

# -- usrloc params --

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# -------------------------  request routing logic -------------------

# main routing logic

route{

	# initial sanity checks -- messages with
	# max_forwards==0, or excessively long requests
	if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483","Too Many Hops");
		exit;
	};

	if (msg:len >=  2048 ) {
		sl_send_reply("513", "Message too big");
		exit;
	};

	### absorb retransmissions ###
	if (!t_newtran()) {
		sl_reply_error();
		return;
	}
	if (method == "MESSAGE") {
		log("*** xmpp-handled MESSAGE message.\n");
		if (xmpp_send_message()) {
			t_reply("200", "Accepted");
		} else {
			t_reply("404", "Not found");
		}
		return;
	}
		
	log("*** xmpp: unhandled message type\n");
	t_reply("503", "Service unavailable");
	return;
}


....